Neurotrac Myoplus2 / Dual Biofeedback & Stim

Neurotrac Myoplus2 / Dual Biofeedback & Stim Overview

Quick answer: The Classic Biofeedback / ETS / Stimulation device.

• The Classic Biofeedback / ETS / Stimulation device. A proper tool for training and progress assessment.
• Pre-set programmes for Incontinence treatment, Sports and muscular development, neuro-muscular Rehabilitation.
• Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
• 2 channel EMG (Biofeedback) combined with 2 channels NMES (stimulation).
• 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
• Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
• Multilingual LCD screen and voice prompts for Biofeedback.
• Manual and Automatic threshold control.
• EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
• Stand alone device or used in conjunction with established multilingual software.
• Now with Bluetooth connectivity!
• The unit sends up to 10 metres of wireless data to PC software

EMG (Biofeedback)

• Dual channel EMG
• EMG Range: 0.2 to 2000 μV RMS (continuous)
• Sensitivity: 0.l μV RMS
• Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
• Selectable Bandpass filter – 3db Bandwidth,
• a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
• b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
• Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
• Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
• Work / Rest periods: 2-99 seconds
• Number of Trials: 1-99 

STIM (Neuromuscular Stimulation)

• Dual channel Stimulator
• Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
• Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
• Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
• Pulse width selection: 50-450 μS (2% accuracy)
• Pulse rate selection: 2-100 Hz (2% accuracy)
• Work / Rest periods: 2-99 seconds
• Time 1 – 99 minutes
• Ramp up time: 0.1 – 9.9 seconds
• Preset and user programmable treatment Programs
• Automatic output shut off with detection of open electrode above 0.5 mA
• Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.

Who Is This Product For?

This product may suit customers and healthcare professionals comparing products for the stated clinical, therapy or personal-care purpose. Always review the supplied specifications and available options before ordering.

Frequently Asked Questions

What is Neurotrac Myoplus2 / Dual Biofeedback & Stim?

The Classic Biofeedback / ETS / Stimulation device.

How do I choose the correct option?

Confirm the stated dimensions, compatibility, intended use and any clinical or facility requirements shown in the product information.

Where can I order Neurotrac Myoplus2 / Dual Biofeedback & Stim in Australia?

Neurotrac Myoplus2 / Dual Biofeedback & Stim is available online from Rehabeshop. Delivery availability and charges for Australian addresses are shown during checkout.

Important Information

Use this product according to the manufacturer's instructions and applicable clinical, manual-handling or infection-control procedures. Confirm dimensions, compatibility, training and facility requirements before ordering.

Explore related products in our Clinical & Therapy Tools collection.